Meridian offers many different types of extraction systems depending on type of fuel used or on-site requirements. The main purpose of extract systems is conveying fuel from a storage area to a subsequent fuel intermediate hopper and subsequently to the boiler.
Sweep Arm Agitators
The sweep-arm agitator is a load depending pressure plate. The substantial sweep-arm is independently powered from the auger and operates depending on the amount of fuel inside the fuel store, with variable diameters.
Pellets Fuel
The sweep-arm agitator is a load depending pressure plate. The substantial sweep-arm is independently powered from the auger and operates depending on the amount of fuel inside the fuel store, with variable diameters.
2m x 2m
Modular Walking Floor
This modular walking floor has a size of 2 x 2 m. It is equipped with one bar. The maximum fuel storage size is approx. 20 m3. The side walls can be built sloping, but the maximum angle of incline is 40 degrees. Two of the walls must always be vertical to prevent bridging of the fuel.
This modular walking floor has a size of 2 x 2 m. It is equipped with one bar. The maximum fuel storage size is approx. 20 m3. The side walls can be built sloping, but the maximum angle of incline is 40 degrees. Two of the walls must always be vertical to prevent bridging of the fuel.
1.5m x 3m
Modular Walking Floor
This modular walking floor has a size of 2 x 2 m. It is equipped with one bar. The maximum fuel storage size is approx. 20 m3. The side walls can be built sloping, but the maximum angle of incline is 40 degrees. Two of the walls must always be vertical to prevent bridging of the fuel.
Push Rod
Discharge Walking Floor
The floor discharger is based on the same technology as the Walking Floor Units, but it is delivered in loose parts. The dischargers must be assembled together with the casting work. The number and length of the rakes is variable, making the floor discharger ideal for different storage solutions. The base area of the floor discharger storages can vary between 7,5 – 40 m². The capacity of the storage can be up to 200 m³.
Contents of delivery:
- Base bars 2-4 pcs D
- Side bar (length according to number of rakes) C
- Discharger rake bars with cylinders (2-4 pcs) and
- guiding tunnels required for their attachment B
- Partition wall (length according to number of rakes) G
- Storage screw with gear motor F
- Hydraulics unit H
- Opposing rakes (1-3 pcs/bar space), Accessory
